How To Remove Faucet From Bathroom Sink

Removing a faucet from a bathroom sink is a relatively simple task that can be completed in a few minutes with the right tools. Here are the steps on how to do it:

Turn off the water supply. There should be two shut-off valves under the sink, one for the hot water and one for the cold water. Turn both of these valves clockwise to turn off the water supply.
Open the faucet to release any remaining water. This will help to prevent water from leaking out when you disconnect the faucet.
Disconnect the water supply lines. There will be two water supply lines connected to the faucet, one for the hot water and one for the cold water. Use a wrench to loosen the nuts that connect these lines to the faucet.
Disconnect the drain line. The drain line is the pipe that connects the faucet to the drain hole in the sink. Use a wrench to loosen the nut that connects the drain line to the faucet.
Remove the faucet. Once the water supply lines and the drain line are disconnected, you can remove the faucet from the sink. Grip the faucet with your hands and pull it straight up to remove it.

Here are some additional tips for removing a faucet from a bathroom sink:

If the faucet is old or corroded, it may be difficult to remove. You may need to use a penetrating oil to loosen the nuts and bolts.
Be careful not to damage the sink when removing the faucet. If the faucet is stuck, do not pry it loose with a screwdriver or other tool. Instead, use a penetrating oil and let it sit for a few minutes before trying to remove the faucet again.
Once the faucet is removed, inspect the sink for any damage. If there is any damage, you may need to repair or replace the sink before installing a new faucet.