Fix A Crack In Porcelain Sink

A cracked porcelain sink is not only unsightly but can also be a breeding ground for bacteria. If you have a cracked porcelain sink, there are a few things you can do to fix it. Here are the steps on how to fix a crack in a porcelain sink:

1. Clean the sink. Before you can start repairing the crack, you need to clean the sink thoroughly. This will remove any dirt or debris that could interfere with the repair.

2. Dry the sink. Once the sink is clean, you need to dry it completely. This will help the epoxy adhesive bond to the porcelain.

3. Apply epoxy adhesive. Apply a thin layer of epoxy adhesive to the edges of the crack. Be sure to work the adhesive into the crack as much as possible.

4. Clamp the crack. Place a clamp over the crack and tighten it until the adhesive oozes out. This will help to hold the crack together while the adhesive dries.

5. Allow the adhesive to dry. Allow the adhesive to dry completely according to the manufacturer's instructions. This may take several hours or even overnight.

6. Remove the clamp. Once the adhesive is dry, remove the clamp. The crack should now be repaired.

7. Test the repair. Fill the sink with water and check for leaks. If there are no leaks, the repair is complete.

Tips

If the crack is large, you may need to use a porcelain repair kit.
Be sure to follow the manufacturer's instructions carefully when using any repair kit.
If you are not comfortable repairing the crack yourself, you can call a professional plumber.