How To Disassemble Bathroom Sink Drain

A bathroom sink drain is a plumbing fixture that allows water to drain from the sink. It is typically made of metal or plastic and consists of a strainer, a stopper, and a drainpipe. The strainer catches hair and other debris, the stopper prevents water from draining, and the drainpipe carries the water away from the sink.

Over time, the drain can become clogged with hair, soap scum, and other debris. This can cause the water to drain slowly or not at all. If the drain is clogged, it is important to disassemble it and clean it.

Here are the steps on how to disassemble a bathroom sink drain:

Turn off the water supply to the sink. This is typically done by turning the handle on the water supply valves clockwise.
Open the drain stopper. This will allow you to access the strainer.
Remove the strainer. The strainer is typically held in place by a few screws. Use a screwdriver to remove the screws and then lift the strainer out of the drain.
Clean the strainer. The strainer can be cleaned with a brush or a cloth. Be sure to remove all of the hair and debris.
Inspect the drainpipe. The drainpipe is the pipe that carries the water away from the sink. Look for any clogs or blockages.
If the drainpipe is clogged, you can use a drain snake to clear the clog. A drain snake is a long, flexible tool that can be inserted into the drainpipe to remove clogs.
Reassemble the drain. Once the drain is clean, you can reassemble it. Start by placing the strainer back into the drain. Then, screw the strainer back into place.
Close the drain stopper. This will prevent water from draining from the sink.
Turn on the water supply to the sink. This will allow you to test the drain to make sure that it is draining properly.

If you are unable to disassemble the drain yourself, you can call a plumber for assistance.