Replacing A Pop Up Sink Stopper

Pop-up sink stoppers are a convenient way to seal the drain in your sink. They are typically made of metal or plastic and have a rubber or silicone gasket that creates a watertight seal. Over time, the gasket can become worn or damaged, causing the stopper to leak. If your pop-up sink stopper is leaking, you can replace it yourself with a few simple tools.

Before you begin, you will need to gather the following tools and materials:

New pop-up sink stopper
Adjustable wrench
Phillips head screwdriver
Pliers
Bucket or bowl
Cloth or sponge

Once you have gathered your tools and materials, you can begin the replacement process.

1. Turn off the water supply to the sink. 2. Place the bucket or bowl under the sink to catch any water that may leak out. 3. Use the adjustable wrench to loosen the nut that holds the stopper in place. 4. Once the nut is loose, you can remove the stopper by pulling it up through the drain hole. 5. Inspect the gasket on the old stopper. If it is worn or damaged, you will need to replace it with a new one. 6. Apply a bead of silicone sealant around the rim of the new gasket. 7. Insert the new stopper into the drain hole and tighten the nut until it is snug. 8. Turn on the water supply and check for leaks. 9. If there are no leaks, you have successfully replaced your pop-up sink stopper.

Replacing a pop-up sink stopper is a simple task that can be completed in a few minutes. By following the steps outlined in this article, you can save yourself the cost of hiring a plumber.