How To Get Plunger Out Of Sink

How to Get a Plunger Out of a Sink

If you've ever had the misfortune of getting a plunger stuck in your sink, you know what a pain it can be. The good news is that there are a few simple steps you can follow to remove it without damaging your sink or the plunger.

Step 1: Clear the drain

The first step is to clear the drain of any water or debris. This will make it easier to see the plunger and to get a grip on it.

To clear the drain, you can use a plunger or a drain snake. If you're using a plunger, be sure to cover the overflow hole with a wet rag to create a seal. Then, plunge the plunger up and down vigorously until the water starts to drain.

If you're using a drain snake, insert the snake into the drain and turn the handle clockwise. The snake will grab onto the debris and pull it out of the drain.

Step 2: Find the plunger

Once the drain is clear, you need to locate the plunger. If you can't see it, you can use a flashlight to help you. The plunger will usually be located at the bottom of the drain, but it may have moved if you've been trying to remove it.

Step 3: Get a grip on the plunger

Once you've found the plunger, you need to get a grip on it. If the plunger has a handle, you can simply grab the handle and pull. If the plunger doesn't have a handle, you can use a pair of pliers or a wrench to grip the plunger.

Step 4: Pull the plunger out

Once you have a grip on the plunger, you can start to pull it out of the drain. Be careful not to pull too hard, or you could damage the sink or the plunger.

If the plunger is stuck, you can try using a lubricant to help it slide out. You can also try tapping the plunger with a hammer or a rubber mallet. This will help to loosen the plunger and make it easier to remove.

Step 5: Clean the plunger and the sink

Once you've removed the plunger, you should clean it and the sink. The plunger may be covered in debris, so it's important to clean it thoroughly to prevent it from getting clogged again.

To clean the plunger, you can use a brush and some soapy water. Be sure to rinse the plunger thoroughly after cleaning it.

To clean the sink, you can use a sponge and some dish soap. Be sure to rinse the sink thoroughly after cleaning it.