Plumbing A Double Sink Vanity

Installing a double sink vanity is a great way to add style and functionality to your bathroom. While it may seem like a daunting task, it is actually quite straightforward with the right tools and materials. Here is a step-by-step guide to help you get the job done right:

Tools and Materials You'll Need:

Adjustable wrench
Basin wrench
Plumber's putty
Teflon tape
Two sink drains
Two sink stoppers
Two water supply lines
Two shut-off valves
P-traps
Faucet

Step 1: Shut Off the Water Supply

Before you begin, it is important to shut off the water supply to your bathroom. This will prevent any flooding or damage from occurring during the installation process.

Step 2: Remove the Old Vanity

Once the water supply is shut off, you can begin removing the old vanity. Start by disconnecting the water supply lines from the faucets. Then, remove the drain pipes from the sinks. Finally, carefully lift the vanity cabinet off of the floor and set it aside.

Step 3: Install the New Vanity

Place the new vanity cabinet in the desired location. Use a level to ensure that it is level. Once the vanity is level, secure it to the wall using screws or bolts.

Step 4: Install the Sinks

Apply a bead of plumber's putty around the rim of each sink. Then, carefully place the sinks in the cutouts in the vanity top. Press down on the sinks to secure them in place.

Step 5: Install the Faucet

Wrap the threads of the faucet with Teflon tape. Then, screw the faucet into the holes in the vanity top. Tighten the faucet using an adjustable wrench.

Step 6: Connect the Water Supply Lines

Connect the water supply lines to the shut-off valves under the sinks. Tighten the connections using an adjustable wrench.

Step 7: Install the Drain Pipes

Connect the drain pipes to the P-traps. Then, connect the P-traps to the drain holes in the sinks. Tighten all of the connections using a basin wrench.

Step 8: Install the Sink Stoppers

Insert the sink stoppers into the drain holes in the sinks. Tighten the stoppers using an adjustable wrench.

Step 9: Turn On the Water Supply

Slowly turn on the water supply to your bathroom. Check for any leaks around the sinks, faucets, or drain pipes. If you find any leaks, tighten the connections until they stop.

Step 10: Enjoy Your New Vanity

Congratulations! You have now successfully installed your double sink vanity. Enjoy the added style and functionality that it brings to your bathroom.