How To Connect Drain Pipe To Sink

Connecting a drain pipe to a sink is a relatively simple task that can be completed in a few steps. By following these instructions, you can ensure that your sink is properly connected and draining correctly.

Materials you'll need:

Slip joint pliers
Adjustable wrench
Plumber's putty
Drain pipe
Sink strainer

Step 1: Remove the old drain pipe If there is an existing drain pipe, you will need to remove it before you can install the new one. To do this, use a slip joint pliers to loosen the nuts that hold the pipe in place. Once the nuts are loose, you can pull the pipe off of the sink drain. Step 2: Clean the sink drain Once the old drain pipe is removed, you need to clean the sink drain. Use a damp cloth to wipe away any dirt or debris that may have accumulated. You can also use a mild abrasive cleaner to remove any stubborn stains. Step 3: Apply plumber's putty to the sink drain Plumber's putty is a sealant that helps to create a watertight seal between the sink drain and the drain pipe. To apply plumber's putty, roll it into a rope and then place it around the base of the sink drain. Be sure to press the putty firmly into place. Step 4: Install the drain pipe Once the plumber's putty is in place, you can install the drain pipe. To do this, simply push the pipe onto the sink drain. Be sure to align the pipe so that the threads are facing up. Step 5: Tighten the nuts Once the drain pipe is in place, you need to tighten the nuts that hold it in place. To do this, use an adjustable wrench to tighten the nuts until they are snug. Be careful not to overtighten the nuts, as this could damage the pipe. Step 6: Install the sink strainer The sink strainer is a metal or plastic screen that fits over the drain pipe. The strainer helps to catch food and other debris that may fall into the drain. To install the strainer, simply place it over the drain pipe and press down until it is secure. Step 7: Test the drain Once the drain is connected, you should test it to make sure that it is working properly. To do this, simply run water into the sink and check for any leaks. If there are any leaks, you may need to tighten the nuts on the drain pipe or apply more plumber's putty. Tips: * If you are not comfortable connecting the drain pipe yourself, you can hire a plumber to do it for you. * Be sure to use the correct size drain pipe for your sink. * If you are using a metal drain pipe, be sure to apply a sealant to the threads to prevent leaks. * If you are installing a new sink, be sure to follow the manufacturer's instructions for connecting the drain pipe.