Remove Drain From Bathroom Sink

The bathroom sink drain is an essential part of the plumbing system, but it can sometimes become clogged or damaged. If this happens, you may need to remove the drain to clean it or replace it. Removing a bathroom sink drain is a relatively simple task that can be completed in a few minutes with the right tools.

Tools You Will Need

Adjustable wrench
Pliers
Bucket
Rags

Step-by-Step Instructions

1. Turn off the water supply to the sink. There should be two shut-off valves under the sink, one for the hot water and one for the cold water. Turn both valves clockwise to close them.

2. Place a bucket under the sink to catch any water that may drain out.

3. Use the adjustable wrench to loosen the slip nut that connects the drain to the sink. The slip nut is usually located at the bottom of the drain.

4. Once the slip nut is loose, use your hands to remove the drain from the sink.

5. Inspect the drain for any clogs or damage. If the drain is clogged, you can try to clean it with a drain snake or a chemical drain cleaner. If the drain is damaged, you will need to replace it.

6. To install a new drain, simply reverse the steps above. First, place the new drain in the sink and tighten the slip nut. Then, turn on the water supply and check for any leaks.

Tips

If you are having difficulty loosening the slip nut, you can try using a pair of pliers.
Be careful not to overtighten the slip nut, as this can damage the drain.
If you are replacing the drain, make sure to choose a drain that is the correct size for your sink.