Cutting Hole In Stainless Steel Sink

Cutting a hole in a stainless steel sink is a relatively simple task that can be completed with a few basic tools. However, it is important to take your time and follow the instructions carefully to avoid damaging the sink or injuring yourself.

Tools and Materials

Stainless steel sink
Hole saw
Drill
Safety glasses
Gloves
Pencil or marking tool
Ruler or measuring tape
Center punch
Cutting oil
Wet/dry vacuum cleaner
Shop towels or rags

Instructions

1. Put on your safety glasses and gloves. 2. Measure and mark the location of the hole on the sink. Use a pencil or other marking tool to make a small dot in the center of the hole. 3. Center the hole saw over the mark and secure it in place with the drill chuck. 4. Apply a small amount of cutting oil to the hole saw. 5. Start the drill on a low speed and gradually increase the speed as the hole saw begins to cut into the sink. 6. Keep the hole saw perpendicular to the sink and apply even pressure as you cut. 7. Once the hole has been cut, stop the drill and remove the hole saw. 8. Use a wet/dry vacuum cleaner to remove any metal shavings from the sink. 9. Wipe down the sink with shop towels or rags to remove any remaining cutting oil or metal shavings.

Tips

Use a sharp hole saw to make a clean cut.
Apply cutting oil to the hole saw to help it cut more easily and to prevent the metal from overheating.
Start the drill on a low speed to prevent the hole saw from jumping or chattering.
Keep the hole saw perpendicular to the sink to avoid damaging the sink or the hole saw.
Apply even pressure as you cut to help the hole saw cut more evenly.
Once the hole has been cut, stop the drill and remove the hole saw immediately to prevent the metal from overheating and warping.

Warnings

Wear safety glasses and gloves when cutting a hole in a stainless steel sink.
Use caution when using a drill and hole saw.
Never attempt to cut a hole in a sink that is not made of stainless steel.
If you are not comfortable cutting a hole in a stainless steel sink, consult a professional.