Double Sink Plumbing With Garbage Disposal And Dishwasher

Installing a double sink with a garbage disposal and dishwasher can be a daunting task, but it is definitely possible to do it yourself with a little planning and preparation. Here are the steps you need to follow:

### Step 1: Gather Your Materials

Before you begin, you will need to gather all of the necessary materials. These include:

- Two sinks - A garbage disposal - A dishwasher - A kitchen faucet - P-traps - Drainpipes - Shut-off valves - Teflon tape - Plumber's putty ### Step 2: Prepare the Cabinets

The first step is to prepare the cabinets for the new sinks. This involves cutting out the holes for the sinks and the garbage disposal. Be sure to measure carefully and follow the manufacturer's instructions.

### Step 3: Install the Sinks

Once the cabinets are prepared, you can install the sinks. Start by applying a bead of plumber's putty around the rim of the sink. Then, carefully place the sink into the hole and press down firmly.

### Step 4: Install the Garbage Disposal

Next, you will need to install the garbage disposal. This is typically done by connecting the disposal to the drainpipe under the sink. Be sure to follow the manufacturer's instructions carefully.

### Step 5: Install the Dishwasher

Once the garbage disposal is installed, you can install the dishwasher. This is typically done by connecting the dishwasher to the water supply and drainpipe under the sink. Again, be sure to follow the manufacturer's instructions carefully.

### Step 6: Connect the Faucet

The next step is to connect the faucet. This is typically done by connecting the faucet to the water supply lines under the sink. Be sure to use Teflon tape on all of the connections.

### Step 7: Install the Drainpipes

Once the faucet is connected, you can install the drainpipes. This is typically done by connecting the P-traps to the drains under the sinks and then connecting the drainpipes to the P-traps. Be sure to use Teflon tape on all of the connections.

### Step 8: Install the Shut-Off Valves

The final step is to install the shut-off valves. These are typically installed on the water supply lines under the sink. Be sure to turn off the water supply before installing the shut-off valves.

### Troubleshooting

If you encounter any problems while installing your double sink with garbage disposal and dishwasher, here are a few troubleshooting tips:

- If the sink is leaking, check to make sure that the plumber's putty is applied evenly around the rim of the sink. - If the garbage disposal is not working, check to make sure that it is properly connected to the drainpipe. - If the dishwasher is not working, check to make sure that it is properly connected to the water supply and drainpipe.