Glue Undermount Sink To Granite

Undermount sinks are a popular choice for kitchens and bathrooms because they offer a sleek and modern look. They are also easier to clean than drop-in sinks, as there is no lip around the sink to catch dirt and grime. However, undermount sinks can be more difficult to install than drop-in sinks, as they require the use of glue to secure them to the countertop.

If you are planning to install an undermount sink in your home, it is important to choose the right glue. Not all glues are created equal, and some are not suitable for use with granite countertops. The best type of glue to use for gluing an undermount sink to granite is a two-part epoxy adhesive.

Two-part epoxy adhesives are strong and durable, and they are also resistant to water and heat. This makes them ideal for use in kitchens and bathrooms, where the sink is likely to be exposed to moisture and heat.

To glue an undermount sink to granite, you will need the following materials:

Two-part epoxy adhesive
Mixing nozzles
Mixing gun
Clean rags
Isopropyl alcohol

Once you have gathered your materials, you can begin the process of gluing the sink to the granite.

1. Clean the surface of the granite countertop where the sink will be installed. Use a clean rag and isopropyl alcohol to remove any dirt or debris.

2. Apply a bead of epoxy adhesive to the rim of the sink. Use a mixing gun and nozzle to apply the adhesive evenly.

3. Place the sink on the granite countertop and press it firmly into place. Use a level to ensure that the sink is level.

4. Wipe away any excess adhesive that squeezes out from under the sink. Use a clean rag dipped in isopropyl alcohol.

5. Allow the adhesive to cure for the amount of time specified by the manufacturer. This is typically 24 to 48 hours.

Once the adhesive has cured, the sink will be securely attached to the granite countertop. You can now use the sink as normal.

Here are some additional tips for gluing an undermount sink to granite:

Make sure that the granite countertop is clean and dry before applying the adhesive.
Use a two-part epoxy adhesive that is specifically designed for use with granite.
Apply the adhesive evenly to the rim of the sink.
Press the sink firmly into place on the granite countertop.
Wipe away any excess adhesive that squeezes out from under the sink.
Allow the adhesive to cure for the amount of time specified by the manufacturer.