Hook Washing Machine Up To Sink

When a washing machine is first installed, it is often connected to a sink in order to drain the water. This is a relatively simple process that can be completed in a few steps.

First, the water supply to the washing machine must be turned off. This is typically done by turning a valve located behind the washing machine. Once the water supply is turned off, the drain hose can be disconnected from the sink.

Next, the drain hose can be connected to the washing machine's drain pump. The drain pump is typically located at the bottom of the washing machine, and it is usually covered by a panel. Once the drain hose is connected to the drain pump, the panel can be replaced.

Finally, the water supply to the washing machine can be turned back on. The washing machine can then be tested to make sure that it is draining properly.

If the washing machine is not draining properly, there are a few things that can be checked. First, make sure that the drain hose is not kinked or blocked. If the drain hose is kinked or blocked, the water will not be able to drain properly.

Next, check the drain pump to make sure that it is working properly. The drain pump can be checked by running the washing machine without any clothes in it. If the drain pump is not working properly, the water will not be able to drain properly.

Finally, check the water supply to the washing machine to make sure that it is turned on. If the water supply is not turned on, the washing machine will not be able to drain properly.

If the washing machine is still not draining properly, it may be necessary to call a plumber for assistance.