How Do You Clear A Clogged Sink

How to Clear a Clogged Sink

A clogged sink is a common household problem that can be frustrating to deal with. However, there are several effective methods you can try to clear it yourself. Here are some step-by-step instructions to help you unclog your sink.

1. Plunge the Sink

Using a plunger is one of the simplest and most effective ways to clear a clogged sink. Fill the sink with a few inches of water to create a seal. Then, place the plunger over the drain and plunge up and down vigorously. The force of the plunging action will help to dislodge the clog.

2. Use a Drain Snake

A drain snake is a thin, flexible tool that can be inserted into the drain to manually remove the clog. Feed the snake into the drain until you feel it reach the obstruction. Then, turn the handle of the snake to rotate it and break up the clog. Pull the snake out and check to see if the water is draining properly.

3. Pour Boiling Water Down the Drain

Boiling water can help to dissolve grease and hair clogs. Pour a pot of boiling water down the drain slowly. Wait a few minutes, then flush the drain with cold water. You may need to repeat this process several times to completely clear the clog.

4. Use a Chemical Drain Cleaner

Chemical drain cleaners are a more aggressive option for clearing clogs. However, they can be harmful to your pipes and the environment, so it is important to use them only as a last resort. Follow the instructions on the product label carefully and never mix different types of drain cleaners together.

5. Remove the Drain Stopper

If the clog is located in the drain stopper, you may be able to remove it manually. Turn off the water supply to the sink and unscrew the drain stopper. Check for any debris or hair that may be blocking the drain.

6. Disassemble the P-Trap

If none of the above methods work, you may need to disassemble the P-trap under the sink to remove the clog. Place a bucket under the P-trap to catch any water that may spill. Use a wrench to loosen the nuts that hold the P-trap in place and remove it. Clean out any debris from the P-trap and reassemble it.