How To Change A Drain In A Sink

A clogged drain is a common problem that can be easily fixed with a few simple steps. If you find yourself with a clogged drain, don't despair! This guide will walk you through the process of changing a drain in a sink, so you can get your sink back up and running in no time.

Here's what you'll need:

A new drain
A wrench
A screwdriver
A bucket
A pair of gloves
A flashlight

Once you have all of your supplies, follow these steps to change the drain in your sink:

Turn off the water supply to the sink. This is usually done by turning the handle on the water supply valves underneath the sink clockwise. When the water supply is off, you will need to open the faucet to release any remaining water in the lines.
Place a bucket underneath the drain to catch any water that may leak out. If the drain is clogged, there may be a lot of water that comes out, so it's important to place the bucket in a location where it will not cause any damage.
Use a wrench to loosen the nuts that hold the drain in place. There are usually two nuts, one on each side of the drain. Loosen the nuts until you can remove them by hand.
Once the nuts are removed, you can pull the drain out of the sink. If the drain is stuck, you may need to gently pry it loose with a screwdriver. Once the drain is loose, inspect it for any damage. If the drain is cracked or broken, you will need to replace it.
If the drain is in good condition, you can now replace it with the new drain. Insert the new drain into the sink and tighten the nuts until they are snug. Be sure not to overtighten the nuts, as this can damage the sink.
Turn on the water supply to the sink and check for leaks. If there are any leaks, tighten the nuts further until the leaks stop. If you cannot stop the leaks, you may need to call a plumber.

Changing a drain in a sink is a simple task that can be completed in a few minutes. By following these steps, you can easily fix a clogged drain and get your sink back up and running in no time.