How To Fix A Broken Sink Stopper

A broken sink stopper can be a frustrating problem, especially if you don't have a spare on hand. But don't worry, it's a relatively easy fix that you can do yourself. Here's a step-by-step guide on how to fix a broken sink stopper:

1. Determine the type of sink stopper you have.
There are two main types of sink stoppers: pop-up stoppers and lift-and-turn stoppers. Pop-up stoppers are the most common type, and they're usually made of rubber or plastic. Lift-and-turn stoppers are less common, and they're usually made of metal. To determine which type of sink stopper you have, simply look at the top of the stopper. If it has a small button or lever, it's a pop-up stopper. If it has a handle that you turn to lift and lower the stopper, it's a lift-and-turn stopper.

2. Remove the old sink stopper.
To remove a pop-up stopper, simply pull up on the stopper until it comes out of the drain. To remove a lift-and-turn stopper, first turn the handle to the "up" position. Then, pull up on the stopper until it comes out of the drain.

3. Clean the drain.
Once you've removed the old sink stopper, take a few minutes to clean the drain. Use a brush or a sponge to remove any debris that may have accumulated in the drain. This will help to prevent the new sink stopper from getting clogged.

4. Install the new sink stopper.
To install a pop-up stopper, simply push the stopper into the drain until it snaps into place. To install a lift-and-turn stopper, first insert the stopper into the drain. Then, turn the handle to the "down" position to secure the stopper in place.

5. Test the sink stopper.
Once you've installed the new sink stopper, test it to make sure that it's working properly. Fill the sink with water and then press the stopper down to close the drain. The water should stop flowing out of the sink. If the water continues to flow out, the stopper may not be installed correctly. Check the stopper to make sure that it's seated properly in the drain.

Tips
* If you're having trouble removing the old sink stopper, you can try using a pair of pliers to grip the stopper and pull it out. * If the new sink stopper doesn't fit snugly in the drain, you can try wrapping a small piece of plumbers tape around the base of the stopper. This will help to create a better seal and prevent leaks. * If you're replacing a pop-up stopper, make sure that the new stopper has the same size and shape as the old stopper. Otherwise, the stopper may not fit properly in the drain.