How To Fix A Drain Stopper In A Bathroom Sink

Fixing a drain stopper in a bathroom sink is a relatively simple task that can be completed in a few minutes. The most common problem with drain stoppers is that they become clogged with hair and soap scum, which prevents them from sealing properly and causing water to leak out of the sink. In some cases, the stopper may also become damaged or worn out, which will also need to be replaced. Here are the steps on how to fix a drain stopper in a bathroom sink:

1. Remove the old drain stopper. The drain stopper is typically held in place by a screw or a nut. Use a screwdriver or a wrench to remove the screw or nut, and then pull the drain stopper out of the sink.

2. Clean the drain stopper and the sink drain. Use a brush or a sponge to clean the drain stopper and the sink drain of any hair, soap scum, or other debris. Rinse the drain stopper and the sink drain thoroughly with water.

3. Inspect the drain stopper. If the drain stopper is damaged or worn out, it will need to be replaced. You can purchase a new drain stopper at most hardware stores or home improvement centers.

4. Install the new drain stopper. Place the new drain stopper in the sink drain and tighten the screw or nut to hold it in place. Make sure that the drain stopper is seated properly and that it is not leaking any water.

5. Test the drain stopper. Turn on the water and let it run for a few minutes to test the drain stopper. Make sure that the drain stopper is sealing properly and that there are no leaks.

If you are unable to fix the drain stopper yourself, you can call a plumber to come and fix it for you.