How To Fix A Dripping Sink

A dripping sink is a common household problem that can be easily fixed with a few simple tools and materials. Here are the steps on how to fix a dripping sink:

Tools and Materials:

Adjustable wrench
Plumber's putty
New washer
Screwdriver
Tape measure
Flashlight

Step 1: Turn off the water supply.

Locate the water supply valves under the sink and turn them clockwise to shut off the water. If there are no valves, you will need to turn off the main water supply to your home.

Step 2: Determine the source of the leak.

Use a flashlight to inspect the sink and faucet for any visible leaks. If you cannot find the leak, you can try running water into the sink and feeling around for any wet areas.

Step 3: Fix the leak.

The most common cause of a dripping sink is a worn-out washer. To replace the washer, you will need to remove the faucet handle and unscrew the packing nut. Once the packing nut is removed, you can pull out the old washer and replace it with a new one. Make sure to apply a thin layer of plumber's putty to the new washer before inserting it.

If the leak is coming from the base of the faucet, you may need to replace the O-rings. To do this, you will need to remove the faucet and disassemble it. Once the faucet is disassembled, you can inspect the O-rings for any damage and replace them if necessary.

If the leak is coming from the drain, you may need to tighten the drain nut. To do this, you will need to use an adjustable wrench to tighten the nut until the leak stops.

Step 4: Turn on the water supply.

Once you have fixed the leak, turn on the water supply and check for any leaks. If there are no leaks, you have successfully fixed the dripping sink.

Tips:

If you are not comfortable fixing the leak yourself, you can call a plumber.
If the leak is coming from the base of the faucet, you may need to replace the entire faucet.
If the leak is coming from the drain, you may need to replace the drain assembly.