How To Fix A Leaky Bathroom Sink Faucet Double Handle

A leaky faucet is a common plumbing problem that can waste water and increase your water bill. If you have a leaky bathroom sink faucet with two handles, you can fix it yourself with a few simple tools and materials.

Here are the steps on how to fix a leaky bathroom sink faucet double handle:

1. Gather your tools and materials.

Adjustable wrench
Phillips head screwdriver
Flat head screwdriver
New faucet washer
Plumber's putty
Rags

2. Turn off the water supply to the faucet.

There are usually two shut-off valves under the sink, one for the hot water and one for the cold water. Turn both valves clockwise to turn off the water supply.

3. Open the faucet to release any remaining water.

This will help to prevent water from leaking out when you remove the faucet handle.

4. Remove the faucet handles.

Most faucet handles are held in place by a screw. Use a Phillips head screwdriver to remove the screw and then pull the handle off.

5. Remove the packing nut.

The packing nut is located below the faucet handle. Use an adjustable wrench to loosen the packing nut and then remove it by hand.

6. Replace the faucet washer.

The faucet washer is a small rubber washer that creates a seal between the faucet stem and the packing nut. Over time, the faucet washer can become worn or damaged, which can cause the faucet to leak. To replace the faucet washer, simply remove the old washer and replace it with a new one.

7. Reinstall the packing nut.

Once you have replaced the faucet washer, reinstall the packing nut by hand. Then, use an adjustable wrench to tighten the packing nut until it is snug.

8. Reinstall the faucet handles.

Push the faucet handles back onto the faucet stem and then tighten the screws to secure them in place.

9. Turn on the water supply and check for leaks.

Turn on the shut-off valves to turn on the water supply. Then, open the faucet and check for leaks. If there are no leaks, you have successfully fixed the leaky faucet.

10. If the faucet is still leaking, you may need to replace the faucet stem.

The faucet stem is the part of the faucet that turns the water on and off. Over time, the faucet stem can become worn or damaged, which can cause the faucet to leak. To replace the faucet stem, you will need to remove the faucet handle and the packing nut. Then, you can use an adjustable wrench to remove the faucet stem.

Once you have removed the old faucet stem, you can replace it with a new one. To install the new faucet stem, simply insert it into the faucet body and then tighten the packing nut. Finally, reinstall the faucet handle and turn on the water supply to check for leaks.