How To Fix A Leaky Sink Handle

A leaky sink handle is a common plumbing problem that can be easily fixed with a few simple tools. Here are the steps on how to fix a leaky sink handle:

1. Gather your tools. You will need a screwdriver, a wrench, and a pair of pliers. If the leak is coming from the base of the handle, you will also need a putty knife.

2. Turn off the water supply to the sink. This is usually done by turning the valve under the sink clockwise. Once the water is turned off, open the faucet to release any remaining water in the line.

3. Remove the handle. Most sink handles are held in place by a screw. Use the screwdriver to remove the screw, then pull the handle straight up to remove it.

4. Inspect the washer. The washer is a small rubber or plastic disc that sits between the handle and the faucet body. If the washer is worn or damaged, it will need to be replaced.

5. Replace the washer. If the washer is worn or damaged, it will need to be replaced. To do this, simply remove the old washer and insert the new washer into its place.

6. Reinstall the handle. Once the washer has been replaced, reinstall the handle by pushing it straight down onto the faucet body. Then, tighten the screw to secure the handle in place.

7. Turn on the water supply and check for leaks. Once the handle has been reinstalled, turn on the water supply and check for leaks. If there is still a leak, tighten the packing nut around the base of the handle. To do this, use the wrench to turn the packing nut clockwise.

8. If the leak is coming from the base of the handle, you may need to replace the O-rings. To do this, use the pliers to remove the old O-rings and insert the new O-rings into their place.

9. Once the new O-rings are in place, reinstall the handle and tighten the packing nut. Then, turn on the water supply and check for leaks.

Fixing a leaky sink handle is a simple task that can be completed in a few minutes. By following these steps, you can save yourself the cost of calling a plumber.