How To Fix Sink Stopper

A sink stopper is a small device that is used to plug the drain hole in a sink. It is typically made of rubber or plastic, and it has a flange that fits over the drain hole. When the stopper is in place, it creates a seal that prevents water from draining out of the sink.

Sink stoppers can become worn or damaged over time, and this can cause them to leak. If your sink stopper is leaking, you may be able to fix it yourself with a few simple steps.

1. Remove the stopper from the drain hole.

To remove the stopper, simply pull it up out of the drain hole. If the stopper is stuck, you may need to use a pair of pliers to gently pry it loose.

2. Inspect the stopper for damage.

Once you have removed the stopper, inspect it for any signs of damage. Look for cracks, tears, or other damage that could be causing the leak.

3. Clean the stopper and the drain hole.

If the stopper is dirty or clogged, it may not be able to create a proper seal against the drain hole. Clean the stopper with a mild detergent and water, and then use a brush to clean the drain hole.

4. Apply a sealant to the stopper.

If the stopper is not damaged, you can try applying a sealant to it. This will help to create a better seal against the drain hole.

5. Reinstall the stopper.

Once you have applied the sealant, reinstall the stopper in the drain hole. Make sure that the stopper is seated properly and that it is creating a good seal.

If you have followed these steps and your sink stopper is still leaking, you may need to replace it. Sink stoppers are relatively inexpensive, and they are easy to replace.