How To Install A Bathroom Vanity And Sink

Installing a bathroom vanity and sink is a relatively simple project that can be completed in a few hours. By following these step-by-step instructions, you can save yourself the cost of hiring a plumber and have a new vanity and sink installed in no time.

Tools and Materials You'll Need:

New bathroom vanity and sink
Faucet and drain assembly
Level
Tape measure
Screwdriver
Wrench
Putty knife
Caulk gun and caulk
Plumber's putty

Step-by-Step Instructions:

1. Remove the old vanity and sink.

Turn off the water supply to the sink. Disconnect the water lines from the faucet and drain. Remove the old vanity and sink from the bathroom. Be careful not to damage the walls or floor.

2. Install the new vanity.

Place the new vanity in the desired location. Level the vanity using a level and shims. Secure the vanity to the wall with screws. Attach the sink to the vanity using the provided screws or bolts.

3. Install the faucet and drain assembly.

Insert the faucet into the hole in the sink. Secure the faucet with the provided nuts and washers. Install the drain assembly in the drain hole. Secure the drain assembly with the provided nuts and washers.

4. Connect the water lines.

Connect the water lines to the faucet. Use a wrench to tighten the connections. Turn on the water supply and check for leaks.

5. Apply caulk.

Apply a bead of caulk around the base of the sink and the vanity. This will help to prevent water from leaking out. Allow the caulk to dry completely.

6. Install the cabinet doors and drawers.

Install the cabinet doors and drawers on the vanity. Adjust the hinges and drawer slides as needed. Make sure that the doors and drawers open and close smoothly.

Your new bathroom vanity and sink are now installed! Enjoy the convenience of a new sink and the added storage space of a vanity.