How To Install Kitchen Sink Faucet

Installing a kitchen sink faucet is a relatively simple plumbing project that can be completed in a few hours. By following these step-by-step instructions, you can easily replace your old faucet with a new one.

What You'll Need

New kitchen sink faucet
Basin wrench
Adjustable wrench
Plumber's putty
Teflon tape
Flashlight (optional)

Step-by-Step Instructions

1. Turn off the water supply to the sink. There will be two shut-off valves located under the sink, one for hot water and one for cold water. Turn both valves clockwise until they are fully closed.

2. Disconnect the water supply lines from the old faucet. Use an adjustable wrench to loosen the nuts that are holding the water supply lines in place. Once the nuts are loose, you can disconnect the water supply lines by hand.

3. Remove the old faucet. Use a basin wrench to loosen the nuts that are holding the old faucet in place. Once the nuts are loose, you can remove the old faucet by hand.

4. Apply plumber's putty to the base of the new faucet. Plumber's putty is a type of sealant that will help to prevent leaks around the base of the faucet.

5. Install the new faucet. Place the new faucet in the hole in the sink. Make sure that the plumber's putty is evenly distributed around the base of the faucet.

6. Tighten the nuts that are holding the new faucet in place. Use a basin wrench to tighten the nuts until they are snug. Do not overtighten the nuts.

7. Connect the water supply lines to the new faucet. Use an adjustable wrench to tighten the nuts that are holding the water supply lines in place. Once the nuts are tight, turn on the water supply to the sink.

8. Check for leaks. Once the water supply is turned on, check for leaks around the base of the faucet and the water supply lines. If there are any leaks, tighten the nuts until the leaks stop.

9. Install the handles. The handles are usually attached to the faucet with screws. Use a screwdriver to tighten the screws until the handles are secure.

10. Turn on the water and check for proper operation. Once the handles are installed, turn on the water and check to make sure that the faucet is working properly.

Tips

If you are not comfortable working with plumbing, it is best to hire a qualified plumber to install your new kitchen sink faucet.
Before you start, make sure that you have all of the necessary tools and materials.
Be careful not to overtighten the nuts, as this can damage the faucet.
If you have any questions, consult a qualified plumber.