How To Mount A Undermount Kitchen Sink

Undermount sinks are a popular choice for modern kitchens, as they create a sleek and seamless look. They are also easier to clean than top-mount sinks, as there is no lip for food and debris to collect. However, installing an undermount sink can be a bit more challenging than installing a top-mount sink. Here are the steps on how to mount an undermount kitchen sink:

1. Prepare the cabinet

The first step is to prepare the cabinet for the sink. This involves cutting out the hole for the sink and installing the mounting clips. The hole for the sink should be cut according to the manufacturer's instructions. The mounting clips should be installed around the perimeter of the hole, about 1 inch apart.

2. Apply sealant to the sink

Once the cabinet is prepared, you can apply sealant to the sink. The sealant will help to create a watertight seal between the sink and the countertop. Apply a bead of sealant around the rim of the sink, and then smooth it out with your finger.

3. Set the sink in place

Once the sealant is applied, you can set the sink in place. Carefully lift the sink into the hole in the cabinet, and then lower it into place. The sink should rest on the mounting clips.

4. Secure the sink

Once the sink is in place, you need to secure it. This can be done with screws or bolts. If you are using screws, drive them through the mounting clips and into the cabinet. If you are using bolts, insert them through the mounting clips and then tighten them with nuts.

5. Connect the plumbing

Once the sink is secured, you can connect the plumbing. This involves connecting the water supply lines to the faucet, and the drain line to the drain pipe. Be sure to use Teflon tape on all of the connections to ensure a watertight seal.