How To Plunge A Sink

A clogged sink is a common household problem that can be easily fixed with a plunger. Plunging a sink is a simple process that can be done in a few minutes. Here are the steps on how to plunge a sink:

1. Gather your materials. You will need a plunger and a bucket or bowl.

2. Place the plunger over the drain. Make sure that the plunger is completely covering the drain. If the plunger is not completely covering the drain, it will not be able to create enough suction to unclog the sink.

3. Fill the sink with water. The water should be deep enough to cover the plunger by about 2 inches.

4. Plunge the sink. Push and pull the plunger up and down vigorously. Continue plunging until the water starts to drain. If the water does not start to drain after a few minutes, you may need to try plunging the sink from the other side.

5. Check the drain. Once the water has drained, remove the plunger and check the drain. If the drain is still clogged, you may need to repeat the process.

Here are some additional tips for plunging a sink:

If you have a double sink, you may need to plunge both sides of the sink.
If the sink is severely clogged, you may need to use a chemical drain cleaner.
To prevent future clogs, avoid putting grease, hair, or other debris down the drain.

Plunging a sink is a simple process that can be done in a few minutes. By following these steps, you can easily unclog your sink and get it working properly again.