How To Remove A Bathroom Faucet From A Sink

How to Remove a Bathroom Faucet from a Sink

Replacing a bathroom faucet is a relatively simple plumbing project that can be completed in a few hours. Before you begin, make sure you have all the necessary tools and materials. You will need:

Adjustable wrench
Pliers
Basin wrench
Flashlight
Bucket
Old towels or rags
New faucet

Once you have gathered your tools and materials, follow these steps to remove the old faucet:

Turn off the water supply.

There should be two shut-off valves under the sink, one for the hot water and one for the cold water. Turn both valves clockwise to shut off the water supply. 2.

Open the faucet.

This will release any remaining water from the faucet and lines. 3.

Place a bucket under the faucet.

This will catch any water that drips out when you disconnect the faucet. 4.

Disconnect the water supply lines.

Use the adjustable wrench to loosen the nuts that connect the water supply lines to the faucet. Be careful not to overtighten the nuts, as this could damage the lines. 5.

Disconnect the drain line.

Use the pliers to loosen the nuts that connect the drain line to the faucet. Be careful not to overtighten the nuts, as this could damage the drain line. 6.

Remove the faucet.

Once the water supply lines and drain line are disconnected, you can remove the faucet from the sink. Be careful not to damage the sink or countertop when removing the faucet.

Once you have removed the old faucet, you can install the new faucet. To do this, follow these steps:

Place the new faucet in the sink.

Make sure the faucet is properly aligned and that the mounting holes are lined up with the holes in the sink. 2.

Secure the faucet.

Use the nuts and washers that came with the new faucet to secure it to the sink. Be careful not to overtighten the nuts, as this could damage the faucet or sink. 3.

Connect the water supply lines.

Use the adjustable wrench to tighten the nuts that connect the water supply lines to the faucet. Be careful not to overtighten the nuts, as this could damage the lines. 4.

Connect the drain line.

Use the pliers to tighten the nuts that connect the drain line to the faucet. Be careful not to overtighten the nuts, as this could damage the drain line. 5.

Turn on the water supply.

Turn on the shut-off valves under the sink to turn on the water supply. Check for leaks around the faucet and water supply lines. Tighten any loose nuts or fittings as necessary.

Replacing a bathroom faucet is a relatively simple plumbing project that can be completed in a few hours. By following these steps, you can easily remove the old faucet and install the new faucet.