How To Remove A Faucet From A Bathroom Sink

Removing a faucet from a bathroom sink is a relatively simple task that can be completed in a few minutes with the right tools. Here are the steps involved for removing a standard two-handle faucet:

Tools Needed:

Adjustable wrench
Pliers
Bucket or bowl
Rags or towels

Step 1: Turn Off the Water Supply

Before you begin, turn off the water supply to the sink. There will be two shut-off valves located under the sink, one for hot water and one for cold water. Turn each valve clockwise until it is fully closed.

Step 2: Open the Faucet

Open the faucet handles to release any remaining water pressure in the lines. This will help prevent water from dripping when you disconnect the faucet.

Step 3: Disconnect the Water Supply Lines

Using the adjustable wrench, loosen the nuts that connect the water supply lines to the faucet. Be careful not to overtighten the nuts, as this can damage the lines.

Step 4: Remove the Mounting Nuts

Locate the mounting nuts that hold the faucet in place. These nuts are usually located under the sink and can be accessed with an adjustable wrench. Loosen the mounting nuts until the faucet is loose.

Step 5: Lift the Faucet Off the Sink

Once the mounting nuts are loose, lift the faucet straight up to remove it from the sink. Be careful not to damage the sink or countertop when lifting the faucet.