How To Remove Bathroom Sink Drain

Bathroom sink drains can become clogged with hair, soap scum, and other debris over time. If your sink is draining slowly or not at all, you may need to remove the drain to clean it. Removing a bathroom sink drain is a relatively simple task that can be completed in a few minutes with the right tools.

Tools You Will Need:

Adjustable wrench or pliers
Bucket or bowl
Plumber's putty (optional)

Steps:

Turn off the water supply to the sink. There are usually two shut-off valves under the sink, one for hot water and one for cold water. Turn both valves clockwise to turn off the water.
Place a bucket or bowl under the drain. This will catch any water that drains out when you remove the drain.
Loosen the drain stopper. Most drain stoppers are held in place by a screw or bolt. Use an adjustable wrench or pliers to loosen the screw or bolt and remove the drain stopper.
Remove the drain flange. The drain flange is the metal ring that surrounds the drain hole. Use an adjustable wrench or pliers to loosen the drain flange and remove it.
Clean the drain. Once the drain is removed, you can clean it with a brush or a drain cleaner. Be sure to remove all of the hair, soap scum, and other debris.
Reassemble the drain. Apply a bead of plumber's putty around the base of the drain flange. Then, insert the drain flange into the drain hole and tighten it with an adjustable wrench or pliers. Finally, replace the drain stopper and tighten the screw or bolt.
Turn on the water supply and check for leaks. Once the drain is reassembled, turn on the water supply and check for leaks. If there are any leaks, tighten the drain flange or the drain stopper until the leak stops.

By following these steps, you can easily remove and clean a bathroom sink drain. This is a simple task that can help keep your sink draining properly and avoid future clogs.