How To Replace Bathroom Sink Drain

How to Replace Bathroom Sink Drain

A bathroom sink drain is a necessary part of any bathroom, and it can be frustrating when it starts to leak or clog. If you're having problems with your bathroom sink drain, you may need to replace it. Replacing a bathroom sink drain is a relatively easy project that can be completed in a few hours.

Here are the steps on how to replace a bathroom sink drain:

Gather your tools and materials.

You will need a new bathroom sink drain, a wrench, a screwdriver, and a putty knife. You may also need a bucket to catch any water that drains out of the sink.

Turn off the water supply to the sink.

The water supply valves are usually located under the sink. Turn the valves clockwise to turn off the water.

Disconnect the drain pipe from the sink.

Use the wrench to loosen the nuts that hold the drain pipe to the sink. Once the nuts are loose, you can pull the drain pipe off of the sink.

Remove the old drain assembly.

The drain assembly is the part of the drain that is located inside the sink. Use the screwdriver to remove the screws that hold the drain assembly in place. Once the screws are removed, you can pull the drain assembly out of the sink.

Clean the sink drain hole.

Use the putty knife to scrape away any old sealant or debris from the sink drain hole. The new drain assembly will need to fit snugly into the drain hole, so it is important to make sure that the hole is clean.

Apply sealant to the new drain assembly.

Apply a bead of sealant around the base of the new drain assembly. The sealant will help to keep the drain assembly in place and prevent leaks.

Insert the new drain assembly into the sink drain hole.

Press the drain assembly into the drain hole until it is snugly in place. Tighten the screws that hold the drain assembly in place.

Reconnect the drain pipe to the sink.

Slide the drain pipe onto the sink drain assembly. Tighten the nuts that hold the drain pipe in place.

Turn on the water supply to the sink.

Check for leaks around the drain assembly. If there are any leaks, tighten the nuts that hold the drain assembly in place.

Replacing a bathroom sink drain is a relatively easy project that can be completed in a few hours. By following these steps, you can save yourself the cost of hiring a plumber.