How To Reseal A Sink Drain

A leaking sink drain can be a real nuisance, but it's a relatively easy fix that can be done in a few minutes. Here's how to do it:

Materials you'll need:

Plumber's putty
Putty knife
Rags
Adjustable wrench

Step-by-step instructions:

Turn off the water supply.

The first thing you'll need to do is turn off the water supply to the sink. This will prevent water from leaking out while you're working.

Remove the old putty.

Use a putty knife to carefully remove the old putty from around the drain. Be careful not to scratch the sink or damage the drain.

Clean the area.

Once the old putty is removed, clean the area around the drain with a rag. This will help to remove any dirt or debris that could prevent the new putty from adhering properly.

Apply the new putty.

Roll a small piece of plumber's putty into a rope and place it around the drain. Press the putty into place with your fingers, making sure to seal it all the way around the drain.

Tighten the drain.

Once the putty is in place, tighten the drain by hand. You can use an adjustable wrench to tighten the drain further, but be careful not to overtighten it.

Turn on the water supply.

Once the drain is tightened, turn on the water supply and check for leaks. If there are any leaks, simply tighten the drain a little bit more.

Resealing a sink drain is a quick and easy fix that can save you a lot of time and money. By following these steps, you can easily fix a leaking sink drain in just a few minutes.