How To Shut Off Sink Water

A leaky sink can be a major inconvenience, not to mention a waste of water. If you have a leaky sink, it is important to shut off the water as soon as possible to prevent further damage. Here are the steps on how to shut off sink water:

Locate the shut-off valves.

The shut-off valves for your sink are usually located under the sink. There will be two valves, one for the hot water and one for the cold water.

Turn off the water supply.

To turn off the water supply, simply turn the shut-off valves clockwise. You should feel the resistance as the valve turns.

Check for leaks.

Once you have turned off the water supply, check for any leaks. Open the faucet and let the water run for a few seconds. If there are no leaks, then you have successfully shut off the water.

If there is a leak, you may need to replace the washer.

The washer is a small rubber ring that sits inside the shut-off valve. Over time, the washer can become worn or damaged, which can cause a leak. To replace the washer, you will need to remove the shut-off valve from the sink. Once the valve is removed, you can replace the washer and reassemble the valve.

If you are unable to stop the leak, you may need to call a plumber.

A plumber can help you identify the source of the leak and make the necessary repairs.

Here are some additional tips for shutting off sink water:

If you are unable to locate the shut-off valves, you can turn off the water at the main water supply. The main water supply is usually located in the basement or crawlspace.
If you are going to be away from home for an extended period of time, it is a good idea to shut off the water at the main water supply. This will prevent any leaks from occurring while you are away.
It is important to test your shut-off valves on a regular basis to make sure that they are working properly. To test the valves, simply turn them off and on several times. If the valves are working properly, you should feel the resistance as you turn them.