How To Snake A Sink

A clogged sink is a common household problem that can be easily fixed with a few simple tools. If you have a sink that is draining slowly or not at all, you can try snaking it to remove the clog. Snaking a sink is a relatively simple process that can be done in a few minutes.

To snake a sink, you will need the following tools:

A sink auger

A bucket or bowl

A wrench (optional)

Once you have gathered your tools, follow these steps to snake your sink:

1. Remove the stopper from the sink. If the stopper is stuck, you can use a wrench to loosen it.

2. Place the bucket or bowl under the sink to catch any water that may come out.

3. Insert the sink auger into the drain hole. Turn the auger clockwise to feed it into the drain.

4. Continue turning the auger until you feel resistance. This means that you have reached the clog.

5. Turn the auger counterclockwise to break up the clog. You may need to apply some force to do this.

6. Once the clog is broken up, continue turning the auger clockwise to remove it from the drain.

7. Flush the sink with hot water to remove any remaining debris.

If you are unable to clear the clog with a sink auger, you may need to call a plumber. However, in most cases, snaking the sink will be sufficient to remove the clog and get your sink draining properly again.

Tips for snaking a sink:

If the clog is particularly stubborn, you may need to use a chemical drain cleaner to help break it up. However, be sure to follow the manufacturer's instructions carefully and use caution when working with chemicals.

If you have a garbage disposal, be sure to turn it off before snaking the sink. This will prevent the auger from getting caught in the disposal.

If you are snaking a sink with a double bowl, be sure to snake both drains. This will help to prevent clogs from forming in the future.

Snaking a sink is a relatively simple process, but it can be messy. Be sure to wear old clothes and gloves to protect yourself from getting dirty.