How To Take Plug Out Of Bathroom Sink

If your bathroom sink is clogged, removing the plug may be an effective solution to unclog it. Here is a step-by-step guide on how to remove the plug from a bathroom sink:

Tools You'll Need:

Plunger
Adjustable wrench or pliers
Bucket or bowl

Steps:

1. Run Hot Water:

Run hot water into the clogged sink to soften any debris. This will make it easier to remove the plug.

2. Plunge the Sink:

Place a plunger over the drain and plunge it vigorously several times. The pressure from the plunging may dislodge the clog and remove the plug.

3. Adjust the Stopper Screw:

Look under the sink for a stopper screw, usually located near the center of the drain assembly. Using an adjustable wrench or pliers, loosen the screw by turning it counterclockwise.

4. Remove the Stopper Body:

Once the stopper screw is loosened, pull up on the stopper body to remove it from the drain. Be careful not to drop it into the drain.

5. Remove the Plug:

Inside the stopper body, you will find a rubber or metal plug. Grip the plug with your fingers or pliers and pull it straight up to remove it.

6. Clean the Plug and Stopper Body:

Inspect the plug and stopper body for any debris or hair. Clean them thoroughly with hot water and soap.

7. Reattach the Plug and Stopper Body:

Insert the plug back into the stopper body. Align the stopper screw with the hole in the drain assembly and gently tighten it by turning it clockwise. Do not overtighten.

8. Test the Drain:

Turn on the water and check if the sink drains properly. If it still clogs, repeat the process or contact a plumber for further assistance.

Tips:

If you have difficulty removing the stopper screw, use an anti-seize lubricant to loosen it.
Be careful not to damage the stopper screw or drain assembly when removing the plug.
If the plug is stuck due to mineral buildup, soak it in vinegar overnight before attempting to remove it.
Always run water through the drain after removing the plug to flush out any remaining debris.