How To Unplug A Bathroom Sink

A clogged bathroom sink is a common plumbing problem that can be easily fixed with a few simple tools. If your sink is draining slowly or not at all, the first step is to try to unplug it yourself. Here are the steps on how to unplug a bathroom sink:

1. Gather your tools. You will need a plunger, a drain snake, and a bucket. 2. Remove the stopper. If your sink has a stopper, remove it by pulling it up or unscrewing it. 3. Place the plunger over the drain. Make sure that the plunger is completely covering the drain hole. 4. Pump the plunger up and down. Do this vigorously for 10-15 seconds. 5. Check the drain. If the water is draining, the clog is clear. If the water is still not draining, repeat steps 3-5. 6. If the plunger does not work, try using a drain snake. Insert the drain snake into the drain hole and turn the handle clockwise. This will help to break up the clog. 7. Once the clog is broken up, flush the drain with hot water. This will help to remove any remaining debris. 8. If the clog is still not clear, you may need to call a plumber.

Here are some additional tips for unclogging a bathroom sink:

If you have a double sink, try plunging both drains at the same time. This can help to create more suction and break up the clog.
If you are using a drain snake, be careful not to push it too far into the drain. This can damage the pipes.
If you are using a chemical drain cleaner, follow the directions on the package carefully. Chemical drain cleaners can be harmful if they are not used properly.

By following these steps, you should be able to unplug your bathroom sink yourself. However, if the clog is severe, you may need to call a plumber.