How To Unstop A Bathroom Sink

A clogged bathroom sink is a common plumbing problem that can be easily fixed with a few simple tools and a little bit of know-how. If you're dealing with a slow-draining or completely clogged sink, follow these steps to get it flowing freely again.

1. Remove the Stopper

The first step is to remove the stopper from the sink. This will allow you to access the drain and remove any debris that may be causing the clog.

2. Check the P-Trap

The P-trap is the U-shaped pipe that connects the sink to the drain. It is a common place for clogs to form. To check the P-trap, place a bucket under it and loosen the nuts that hold it in place. Be careful not to overtighten the nuts, as this can damage the P-trap.

3. Remove the Clog

Once you have removed the P-trap, you can use a drain snake or a pair of pliers to remove the clog. If the clog is caused by hair or other small debris, you may be able to remove it by hand.

4. Clean the Drain

Once the clog has been removed, you should clean the drain to prevent future clogs. You can use a drain cleaner or a mixture of vinegar and baking soda. Pour the cleaner down the drain and let it sit for a few minutes. Then, flush the drain with hot water.

5. Reassemble the Sink

Once the drain is clean, you can reassemble the sink. Start by replacing the P-trap. Then, tighten the nuts that hold it in place. Finally, replace the stopper.