Installing New Kitchen Sink Faucet

A leaky or outdated kitchen sink faucet can be a major inconvenience. Replacing it is a relatively simple plumbing project that can be completed in a few hours. Here's a step-by-step guide to help you get the job done:

Tools and Materials:

New kitchen sink faucet
Adjustable wrench
Plumber's putty
Teflon tape
Basin wrench
Bucket
Towels

Step 1: Turn off Water Supply

Start by turning off the water supply to your sink. There should be two shut-off valves located under the sink, one for hot water and one for cold water. Turn both valves clockwise to the closed position.

Step 2: Disconnect Old Faucet

Place a bucket under the sink to catch any dripping water. Use an adjustable wrench to loosen the nuts that connect the water supply lines to the old faucet. Once the nuts are loose, you can disconnect the water lines by hand.

Next, use a basin wrench to loosen the mounting nuts that hold the faucet in place. Once the nuts are loose, you can lift the faucet out of the sink.

Step 3: Apply Plumber's Putty and Teflon Tape

Before installing the new faucet, apply a bead of plumber's putty around the base of the faucet. This will help to seal the faucet and prevent water leaks.

Next, wrap a few layers of Teflon tape around the threads of the water supply lines. This will help to create a watertight seal between the water lines and the faucet.

Step 4: Install New Faucet

Place the new faucet in the sink and align the mounting holes. Insert the mounting bolts through the holes and tighten them with the basin wrench.

Connect the water supply lines to the faucet. Hand-tighten the nuts as much as possible, then use the adjustable wrench to tighten them further.

Step 5: Turn on Water Supply

Once the faucet is installed, turn on the water supply and check for leaks. If there are any leaks, tighten the nuts on the water supply lines further.