Kitchen Sink Garbage Disposal Installation Diagram

The kitchen sink garbage disposal is a convenient appliance that can help you to keep your kitchen clean and free of food waste. However, if you are not familiar with plumbing, installing a garbage disposal can be a daunting task. This diagram will provide you with a step-by-step guide on how to install a kitchen sink garbage disposal.

Tools and materials you will need:

Garbage disposal
Wrench
Screwdriver
Pliers
Electrical tape
Plumber's putty

Step 1: Turn off the water supply.

The first step is to turn off the water supply to your sink. You can do this by turning off the main water valve or by closing the valves under the sink.

Step 2: Disconnect the old garbage disposal.

If you are replacing an old garbage disposal, you will need to disconnect it before you can install the new one. To do this, simply unplug the electrical cord and then use a wrench to loosen the nuts that are holding the disposal in place.

Step 3: Install the new garbage disposal.

Once you have disconnected the old garbage disposal, you can install the new one. To do this, first apply a bead of plumber's putty around the rim of the disposal flange. Then, insert the disposal into the sink hole and tighten the nuts that are holding it in place.

Step 4: Connect the electrical cord.

Once the disposal is in place, you need to connect the electrical cord. To do this, simply plug the cord into the outlet under the sink.

Step 5: Turn on the water supply.

Once the electrical cord is connected, you can turn on the water supply. To do this, simply turn on the main water valve or open the valves under the sink.

Step 6: Test the garbage disposal.

Once the water supply is on, you can test the garbage disposal. To do this, simply turn on the disposal and then run some water down the drain. The disposal should start to grind up the food waste.

Troubleshooting:

If you are having trouble installing your garbage disposal, there are a few things you can check.