Plumbing A Three Compartment Sink

A three compartment sink is a common fixture in commercial kitchens. It is used for washing dishes, rinsing them, and sanitizing them. The sink is typically made of stainless steel and has three compartments of equal size. The first compartment is used for washing dishes, the second compartment is used for rinsing them, and the third compartment is used for sanitizing them. The sink is also equipped with a drainboard on one side for draining dishes.

Plumbing a three compartment sink is a relatively simple process. The first step is to install the sink. The sink is typically installed in a countertop. The countertop must be level and the sink must be secured to the countertop with screws. The next step is to connect the water supply lines to the sink. The water supply lines are typically connected to the sink with compression fittings. The third step is to connect the drain line to the sink. The drain line is typically connected to the sink with a slip joint fitting. The fourth step is to install the faucet. The faucet is typically installed in the center of the sink. The faucet is connected to the water supply lines with compression fittings.

Once the sink is installed, it is important to test the plumbing to make sure that there are no leaks. The first step is to turn on the water supply and check for leaks around the sink. The next step is to turn on the faucet and check for leaks around the faucet. If there are any leaks, they should be repaired before using the sink.

Three compartment sinks are an important part of a commercial kitchen. They provide a convenient and efficient way to wash, rinse, and sanitize dishes. By following the steps outlined in this article, you can easily plumb a three compartment sink.

Materials Needed

Three compartment sink
Countertop
Screws
Water supply lines
Compression fittings
Drain line
Slip joint fitting
Faucet

Tools Needed

Wrench
Screwdriver
Level

Steps

1. Install the sink. The sink is typically installed in a countertop. The countertop must be level and the sink must be secured to the countertop with screws. 2. Connect the water supply lines to the sink. The water supply lines are typically connected to the sink with compression fittings. 3. Connect the drain line to the sink. The drain line is typically connected to the sink with a slip joint fitting. 4. Install the faucet. The faucet is typically installed in the center of the sink. The faucet is connected to the water supply lines with compression fittings. 5. Test the plumbing to make sure that there are no leaks. The first step is to turn on the water supply and check for leaks around the sink. The next step is to turn on the faucet and check for leaks around the faucet. If there are any leaks, they should be repaired before using the sink.