Pop Up Bathroom Sink Drain

A pop up bathroom sink drain is a type of drain that is opened and closed by pressing a button or lever. The drain is typically made of metal or plastic and is installed in the center of the sink. When the drain is closed, it forms a watertight seal that prevents water from draining out of the sink. When the drain is opened, the stopper pops up and allows water to flow out of the sink.

Pop up bathroom sink drains are a popular choice for bathrooms because they are easy to use and maintain. They are also relatively inexpensive and can be installed in most sinks. However, pop up bathroom sink drains can be more difficult to clean than other types of drains, and they may not be as durable.

Types of Pop Up Bathroom Sink Drains

There are two main types of pop up bathroom sink drains: push button and lever. Push button drains are opened and closed by pressing a button on the top of the drain. Lever drains are opened and closed by moving a lever on the side of the drain.

Push button drains are the most common type of pop up bathroom sink drain. They are easy to use and can be installed in most sinks. However, push button drains can be more difficult to clean than lever drains.

Lever drains are less common than push button drains. They are more difficult to use, but they are also easier to clean. Lever drains are a good choice for sinks that are difficult to reach.

How to Install a Pop Up Bathroom Sink Drain

Installing a pop up bathroom sink drain is a relatively easy task. The following steps will guide you through the process:

Turn off the water supply to the sink.
Remove the old drain by unscrewing the nut that holds it in place.
Clean the drain hole and apply a bead of plumber's putty around the edge of the hole.
Insert the new drain into the hole and tighten the nut until it is snug.
Turn on the water supply and check for leaks.

How to Clean a Pop Up Bathroom Sink Drain

Pop up bathroom sink drains can be cleaned by following these steps:

Remove the stopper from the drain.
Pour a cup of baking soda down the drain.
Follow the baking soda with a cup of white vinegar.
Let the solution sit for 15 minutes.
Flush the drain with hot water.

If the drain is still clogged, you may need to use a drain snake to remove the clog.

Troubleshooting Pop Up Bathroom Sink Drains

If your pop up bathroom sink drain is not working properly, there are a few things you can do to troubleshoot the problem:

Check the stopper to make sure that it is not clogged.
Check the linkage between the stopper and the drain to make sure that it is not broken.
Tighten the nut that holds the drain in place.
Replace the drain if it is damaged.

If you are unable to troubleshoot the problem yourself, you should call a plumber.