Push Button Bathroom Sink Drain

A push-button bathroom sink drain is a type of drain that is opened and closed by pressing a button on the top of the drain. This type of drain is often used in public restrooms and commercial buildings, but it can also be installed in homes. Push-button drains are a convenient and easy way to open and close a drain, and they can help to prevent clogs.

How Do Push Button Bathroom Sink Drains Work?

Push button bathroom sink drains work by using a spring-loaded mechanism to open and close the drain. When the button is pressed, the spring is released and the drain opens. When the button is released, the spring closes the drain.

The spring is usually made of stainless steel, and it is strong enough to keep the drain closed even when there is water pressure pushing against it. The button is usually made of plastic or metal, and it is designed to be easy to press.

Benefits of Push Button Bathroom Sink Drains

Push button bathroom sink drains offer a number of benefits over traditional drains.

Convenience: Push button drains are very convenient to use. You simply press the button to open the drain, and release the button to close it.
Easy to clean: Push button drains are easy to clean. You can simply remove the button and clean it with soap and water.
Clog-resistant: Push button drains are less likely to clog than traditional drains. The spring-loaded mechanism helps to keep the drain clear of hair and other debris.
Durable: Push button drains are made of durable materials, and they are designed to last for many years.

Installation of Push Button Bathroom Sink Drains

Push button bathroom sink drains are relatively easy to install. You can usually install a push button drain in less than an hour.

To install a push button drain, you will need the following tools:

Adjustable wrench
Plumber's putty or silicone sealant
Phillips screwdriver

To install the drain, follow these steps:

Remove the old drain. To do this, use an adjustable wrench to loosen the slip nut that holds the drain in place. Once the slip nut is loose, you can pull the drain out of the sink.

Apply a bead of plumber's putty or silicone sealant to the underside of the new drain. This will help to create a watertight seal.

Insert the new drain into the sink. Make sure that the drain is centered in the sink hole.

Tighten the slip nut until it is snug. Do not overtighten the slip nut, as this could damage the drain.

Install the button. To do this, simply press the button onto the drain. The button should snap into place.

Test the drain. To do this, fill the sink with water and then press the button to open the drain. The water should drain out of the sink quickly and easily.

Troubleshooting Push Button Bathroom Sink Drains

If your push button bathroom sink drain is not working properly, there are a few things you can do to troubleshoot the problem.

Check the button. The button may be stuck or broken. If the button is stuck, you can try to free it by gently pressing on it. If the button is broken, you will need to replace it.
Check the spring. The spring may be broken or stretched. If the spring is broken, you will need to replace it. If the spring is stretched, you can try to tighten it by turning the screw that holds it in place.
Check the drain hole. The drain hole may be clogged with hair or other debris.

If you have tried all of these troubleshooting tips and your push button bathroom sink drain is still not working properly, you should call a plumber.