Remove Rust From Porcelain Sink

Rust is a common problem in porcelain sinks, especially in areas with hard water. The good news is that there are a few easy ways to remove rust from porcelain without damaging the finish.

Method 1: Baking Soda and Vinegar

This is a classic method for removing rust from porcelain. To do it, you will need:

Baking soda
Vinegar
A soft cloth

Instructions:

Make a paste of baking soda and vinegar.
Apply the paste to the rusted area.
Let the paste sit for 15-20 minutes.
Scrub the rusted area with a soft cloth.
Rinse the sink with water.

Method 2: Commercial Rust Remover

If the baking soda and vinegar method does not work, you can try using a commercial rust remover. These products are available at most hardware stores.

Instructions:

Follow the instructions on the product label.
Be sure to wear gloves and eye protection when using a commercial rust remover.

Method 3: Pumice Stone

A pumice stone is a natural abrasive that can be used to remove rust from porcelain. To do this, you will need:

A pumice stone
Water

Instructions:

Wet the pumice stone.
Rub the pumice stone over the rusted area.
Rinse the sink with water.

Tips

Always test any cleaning method in an inconspicuous area first to make sure it does not damage the porcelain.
If the rust is severe, you may need to repeat the cleaning process several times.
To prevent rust from forming in the future, wipe down your porcelain sink with a dry cloth after each use.