Replace Under Sink Cabinet Floor

If the floor of your under-sink cabinet is damaged or rotted, you can replace it yourself with a few simple tools and materials. Here's a step-by-step guide to help you get the job done.

Tools and Materials You'll Need

* Measuring tape * Pencil * Jigsaw or circular saw * Plywood or other durable material * Wood screws * Drill * Screwdriver * Caulk gun * Caulk * Utility knife

Step 1: Remove the Old Floor

* Start by removing everything from the cabinet. * Then, use a utility knife to score around the edges of the old floor. * Be careful not to cut into the cabinet itself. * Once you've scored around the edges, use a jigsaw or circular saw to cut the old floor out of the cabinet.

Step 2: Measure and Cut the New Floor

* Measure the opening in the cabinet and cut a piece of plywood or other durable material to that size. * Make sure the new floor is slightly smaller than the opening so that it will fit snugly into place.

Step 3: Install the New Floor

* Place the new floor into the opening in the cabinet. * Secure the new floor in place with wood screws. * Start by driving screws into the corners of the floor, then add additional screws around the perimeter.

Step 4: Caulk Around the Edges

* Apply a bead of caulk around the edges of the new floor where it meets the cabinet. * Smooth the caulk with your finger or a wet rag. * The caulk will help to seal the floor and prevent water from leaking into the cabinet.

Step 5: Replace the Cabinet Contents

* Once the caulk has dried, you can replace the contents of the cabinet.

Tips

* If the old floor is severely damaged, you may need to replace the entire cabinet. * If you're not comfortable working with power tools, you can hire a handyman to replace the floor for you. * Regular cleaning and maintenance will help to extend the life of your under-sink cabinet floor.