Sink Pop Up Drain Parts

Sink pop up drains are a common type of drain found in many sinks. They are typically made up of a few different parts, including a stopper, a linkage, and a drain body. The stopper is the part that you push down to close the drain, and the linkage is the part that connects the stopper to the drain body. The drain body is the part that is attached to the sink and allows water to flow out.

If your sink pop up drain is not working properly, it is likely that one of the parts is damaged or worn out. Fortunately, sink pop up drain parts are relatively easy to replace. Here is a guide on how to replace the most common sink pop up drain parts:

Stopper

To replace the stopper, first remove the old stopper by pulling it straight up. Then, insert the new stopper into the drain body and push down until it is in place.

Linkage

To replace the linkage, first remove the old linkage by unscrewing the nut that holds it in place. Then, insert the new linkage into the drain body and tighten the nut.

Drain Body

To replace the drain body, first remove the old drain body by unscrewing the nuts that hold it in place. Then, insert the new drain body into the sink and tighten the nuts.

Once you have replaced the damaged or worn out parts, your sink pop up drain should be working properly again. If you are still having problems with your sink pop up drain, you may need to call a plumber for assistance.

Additional Tips

Here are a few additional tips for replacing sink pop up drain parts:

Before you start, be sure to turn off the water supply to the sink.
If you are having trouble removing the old parts, you can use a pair of pliers to help you.
Be sure to tighten all of the nuts and bolts securely.
If you are still having problems, you may need to call a plumber for assistance.